Fiberbuilt Grass Series Combo Mat System - Center Hitting - 10'X16'
A center-hitting Fiberbuilt Grass Studio Mat pairs seamlessly with a 12-foot premium putting green, creating the ultimate full-game practice environment for right- and left-handed players. This setup offers the largest space to refine every stroke with unmatched realism.
Perfect your game one swing at a time with the Fiberbuilt Grass Series 10’ x 16’ Center-Hitting Combo Mat, featuring a legendary Studio Mat paired with a premium putting green. Practice every club in your bag on ultra-durable Fiberbuilt Grass, designed for long-lasting use and injury-free swings. This oversized mat suits both right- and left-handed golfers, offering the ultimate setup for outdoor practice or indoor simulator sessions.
Combines a 10’ x 4’ hitting mat (two 4.5’ x 4’ Performance Turf stance mats and one 1’ x 4’ section of genuine Fiberbuilt Grass) with a 10’ x 12’ putting green
Practice every stroke, from driving to irons, wedges, chips and putts
Fiberbuilt Grass includes a 300,000 swing guarantee
Accommodates both right- and left-handed golfers
Center hitting section includes 4 tee holes, which accommodate the included adjustable-height tee
The center-hitting configuration is ideal for down-the-line radar launch monitors like TrackMan and FlightScope
Assembles in just a few easy, tool-free steps
Includes: 1 Fiberbuilt Grass hitting panel, 2 Performance Turf stance mats, Putting Turf with 2 hole cutouts, 2 metal cups, 1 Adjustable Tee, and our exclusive tool-free modular rubber foundation with easy-lock fasteners
What's Included
What's Included
1 Fiberbuilt Grass hitting panel
2 Performance Turf stance mats
Putting Turf with 2 hole cutouts
2 metal cups
1 Adjustable Tee
Our exclusive tool-free modular rubber foundation with easy-lock fasteners
Product Care
Product Care
Regular maintenance of your Fiberbuilt Golf Mat System will ensure maximum life for the components.
Hitting Surface Panels
Cleaning:Fiberbuilt Grass and Player Preferred Series hitting surfaces should be pressure washed once per year to remove any sand or dirt that has accumulated in the fibers.
Maintenance:Regularly changing the ball position for hitting on the 2'x4' Player Preferred hitting panels will minimize the wear of the panels. These panels can also be rotated 180º to increase their lives.
Fiberbuilt Grass panels can also be rotated 180º as wear emerges on one side. Additionally, these panels consist of 4 individual squares that can be rotated for maximum life. Below is a photo of the rotation pattern options.
When the middle panel(s) need replacing, remove them from the hitting surface, bring the outside panels to the center and replace the outside panels with 2 new ones OR as shown below, when you have two hitting surfaces take the 2 end panels from the panel ‘B’ 4-pack and use them to replace the worn inner panels just removed from panel ‘A’.
To rotate the panels, remove the L-channel brackets and separate the four panels that make up the driving surface. Rotate the panels so that you have a ‘new’ panel in place of where the rubber tees would be placed. Once the panels have been rotated, to re-assemble the panel components evenly and securely us a rubber hammer and “jig” to fasten the components back in place. It is important that all four components are level to recreate the smooth hitting surface.
Once the four panels have been re-assembled you can attach the “L channel”. You will need to shift the ‘L channel” slightly, drill the self-taping Robertson #2 screws into the bottom of the panel. Do not reuse the same holes.
Stance Mats
Cleaning:The Performance Turf stance mats should be removed from the rubber foundation to be pressure washed every few months. Sand and dirt collects in the nylon fibers of the turf stance mat and will deteriorate and damage the nylon if it is not washed regularly.
Maintenance:The stance mat is square to enable you to rotate the mat to balance wear. If you have rubber stance mats, sweeping and pressure washing with water will keep them clean. Never apply any cleaning or shining agents to the stance mat.
Rubber Foundation
Maintenance:The rubber foundation should be swept out occasionally. The frame may also be pressure washed. You will need to ensure that the drainage holes do not plug up with sand and dirt. You may also consider drilling additional holes into the rubber foundation to accelerate the water drainage.To keep your rubber foundation looking clean and new, you can apply tire cleaner (like Armor All) to the outside edges only.
Ball Trays
Maintenance:Ball Trays should be swept and cleaned occasionally and may also be pressure washed. To keep ball trays looking new, apply a tire cleaner (like Armor All) to the ball trays.
Off-Season Storage
Stack the hitting surface vertically against a wall and stack only 5-8 deep. Do NOT stack the hitting surface horizontally on top of each other; this will flatten the nylon fibers. The turf stance mats and the rubber foundations can be stacked on each other horizontally. Do not mix the stack.
Parts & Assembly Information
Parts & Assembly information
Parts & Assembly information for the 10' x 16' Fiberbuilt Grass Series Combo Mat can be foundHERE.
Fiberbuilt Golf Warranty & Return Policy
Fiberbuilt Warranty
Fiberbuilt® shall repair or replace any products that it manufactures which prove to be defective in workmanship or material within one year of the date of purchase. Except for Stance and Turf Mats, which have a limited 1- year warranty against manufacturers defects. Fiberbuilt® rubber bases have a 5 year limited warranty against defects. The foregoing is in lieu of all other warranties, expressed or implied, including merchantability or fitness for a particular purpose, and all other obligations or liabilities on the part of Fiberbuilt®. In no event shall Fiberbuilt® be liable for consequential damages, transportation, labor or other charges for adjustments, repairs, replacement of parts, installation or other work which may be done upon or in connection with such products by the Distributor or others.
This warranty does not apply if the item is modified, tampered with, misused, or used in any way not originally intended by the manufacturer. The Fiberbuilt® warranty is limited and in no case shall Fiberbuilt® be liable for other direct, indirect, or consequential damage from the use or handling of any product sold.
For a free one-year extension to our standard warranty, exclusive access to insider deals, new product information, and much more, register your Fiberbuilt mat today.
Items can be returned within 30 days of purchase, provided they are in new and unused condition and in their original packaging. Please note that the cost of return shipping to our warehouse in North Carolina is the responsibility of the purchaser. Once we receive your return, we will inspect the product, and if approved, a refund will be issued for the purchase price, minus the outbound shipping costs.
If you have a return, please email us at returns@bighorngolfer.com to request an RA# and return shipping address.
Unlock the Secret to a Greener, Quieter, and More Luxurious Golf Experience! Take our quick quiz to find the ideal electric cart tailored to your game and lifestyle